Combined with the advantages of hydraulic IMM and fully electrical IMM, Powerjet has invented a new series of servo moter driven injection molding machinery, which achieve much more energy saving and faster response speed than the valiable pump series IMM.

Integrated Evaluation
A better cost performance is seen for the S5 series.
Outstanding Energy Saving
Comparing with the hydraulic machine, S5 series can save more 50% of the power. Comparing with full electrical machine, energy saving is more abviously seen during pressure hold & cooling stage.
Faster Response Speed
S5 series only needs 0.05 seconds to achieve the Max. Flow rate, which effectively shorten the cycle time and thus improves efficiency.
Better Stability
with the adoption of servo control system, the injection pressure & speed is under close-roop controlled, and the stability and repeatability can be achieved.

BJ90S5
CLAMPING UNIT
Clamping force 900 KN
Opening stroke 320 mm
Space between bars 360*360 mm*mm
Max. Mold height 360 mm
Min. Mold height 130 mm
Ejector stroke 100 mm
Ejector force 34 KN

INJECTION UNIT
Screw diameter 30 36 42 mm
Screw L/D Ratio 20 20 17 mm
Injection Pressure 259 180 132 Mpa
Shot volume 113 163 222 cm³
Shot weight(PS) 106 153 208 ( g)
3.7 5.4 7.2 (OZ)
Injection rate 62.5 90 122 g/sec
Screw stroke 160 mm
Screw speed 230 rpm

POWER UNIT
Hydraulic system Pressure 17.5 Mpa
Pump motor power 11 KW
Heater power 6 KW

GENERAL
Oil tank capacity 160 L
Machine weight 3.3 T
Dimensions(L*W*H) 3.84*0.94*1.7 m