This product is no longer promoted on Made-in-China.com. If you find any infringement or sensitive information of it, please contact us for handling. Thank you.

Pet Preform Injection Molding Machine with Energy Saving Variable Pump (PET-1505V2)

Contact Supplier

Diamond Member Since 2023

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
PET-1505V2
Trademark
PowerJet
HS Code
8477101090

Product Description

Specification:
1. Specially made screw is fitted for PET material, achieves larger shot weight, better plasticizing and lower shearing of the preform
2. Yuken(Japan) proportional variable pump is used in the machine, which can save energy by 30-50%
3. To enlarge the water running system makes it better for mold cooling and transparency of the product.
4. Increasing ejector stroke, adapts PET preform molding
5. Whole closed safe door meets the requirement of sanitary and thermo-control.
6. Hot runner system interface is included
7. Whole production project can be provided, including moulds, injeciton molding machine, PET stretch blow molding machine and auxiliary equipments.
Technical Parameter of PET-1505V2
Description Unit PET-1505V2
    HPET-1505V2
Injection Unit    
Screw Diameter mm 75
Screw L/D Ratio   22
Shot Volume cm3 1303
Shot Weight(@PS1.05) g 1224
Shot weight(@PET1.3) g 1515
Shot weight(@PP0.9) g 1049
  Injection Pressure Mpa 295
Max. screw rotary speed rpm 170
Clamping Unit    
Clamping Force KN 3300
Opening Stroke mm 600
Max daylight: mm 1300
Space between Bars(H*V) mm*mm 670x670
Movable platen size(H*V) mm*mm 985x985
Max. Mold Height mm 700
Min. Mold Height mm 300
Ejector Stoke mm 180
Ejector Force KN 184
Ejector-back force KN 115
Number of ejector pins   12+1
Power Unit    
Hydraulic System Pressure Mpa 17.5
Pump Motor Power KW 30
Heater Power KW 20
Total current A 147.5
General     
Oil Tank Capacity L 560
Machine Weight Ton 10.5
Machine Dimensions(L*W*H) m*m*m  7.1x1.62x2.3
     
Remarks: H series can achieve press holding and material charge at the same time, suitable for the mold with better cooling system, shortening the cycle time.

Send your message to this supplier

*From:
*To:
avatar Mr. Darren Deng
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now