| Customization: | Available |
|---|---|
| Warranty: | 1 Year |
| Type: | Injection Molding Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Powerjet provides specialized injection molding machines dedicated to plastic cutlery products, such as: Disposable thin-wall food containers, plastic spoons, forks and knives, etc. We have improved the injection system to makes thin-wall products easier to solidify, and can save 30-50% of energy compared to common models.
KF series is our specialized injection molding machine for thin-wall products
FEATURES:
1:Energy-Saving 30%~50%
Servo motor with energy-saving controlled hydraulic systems can save electricity up to 30%~50%.
2:Low Temperature Injection
Low-Temperature Injection Makes More Energy Saving And Keeping Products With High Tenacity And Toughness By Our Innovative Plasticizing System.
3:Low Pressure Injection
Low-Pressure Injection To Gain Better Mechanical Protection And Longer Mould Service Life. Also Makes Molding Products With Low Stress And Deformation.
4:Fast Response Speed
Optimized Control System Response Speed Let Our Shooting Rate Reaching The Best Short Time Within 0.3 Seconds.
| DESCRIPTION | UNIT | KF398-S8 | |
| CLAMPING UNIT | Clamping force | KN | 3980 |
| Opening stroke | mm | 580 | |
| Max.datlight | mm | 1230 | |
| Platen size | mm | 1000*1000 | |
| Space between bars | mm | 670*670 | |
| Max.mold height | mm | 650 | |
| Min.mold height | mm | 240 | |
| Ejector stroke | mm | 100 | |
| Ejector force | KN | 77 | |
| INJECTION UNIT | Screw diameter | mm | 52 |
| Screw L/D Ratio | L/D | 24 | |
| Injection Pressure | MPa | 188 | |
| Shot volume | cm3 | 425 | |
| Screw stroke | mm | 200 | |
| Screw speed | rpm | 300 | |
| POWER UNIT | Pump motor power | KW | 51+51 |
| Heater power | KW |
30 |
Q1: Are you a manufacturer or trading company?
A1: We are a factory for plastic machines. Over 20 Years of Experience In Manufacturing Injection Molding Machines and Blow Molding Machines.
Q2: Is it possible to send an engineer to install and commission the machine, even train our workers?
A2: Yes, we can send our engineer to your factory for installation, commissioning, training. We have some engineers flying among different countries for after-sales service and technical support. Therefore, we need you to prepare an invitation letter for the visa before shipment. However, please be noted that all costs for visa, travel, the hotel should be paid in advance by customers.
Q3: If we buy your machines, is there any warranty?
A3: Yes, definitely. 12-months warranty after shipment for mechanical parts, hydraulic parts, electric components (The screw just has 6-months). We are responsible for broken parts within 12-months. We will supply those parts for free but the possible transportation cost should be paid by clients.
){kind=link}