1. Clamping Unit:
-Five points double toggle mould clamping mechanism is featured with fast opening & clamping, stable & energy saving.
-Reliable low pressure protection function greatly prolongs the service life of the mould.
-Mechanical & double electric interlock protection devices guarantee the safety of the operators.
2. Injection Unit:
-Infection platform is fixed by double axis pin plus flat key so that it is stable.
-Double cylinder balance infection molten material mechanism provides high-pressure injection of molten material & safe space.
3. Features of hydraulic system:
-Perfect combination between computer & high efficient proportional plunger variable pump saves electricity by 25%-50%.
4. Controller:
-Six stages material injection speeds & pressure, three stages pressure holding speed & pressure, and two stages material molten speed & pressure control can meet all complicated process requirement of products.
-Fuzzy temperature control is used. High & low temperature deviation alarm & thermocouple disconnection inspection functions are available.
5. IF YOU NEED MORE DETIALS, PLEASE CONTACT US.
Variable Pump Injection Molding Machine Technical Parameter of BJ128V6 |
Description | Unit | BJ128V6 |
Clamping Unit | | |
Clamping Force | KN | 1280 |
Opening Stroke | mm | 350 |
Max daylight: | mm | 730 |
Platen size | mm | 610x610 |
Space between Bars(H*V) | mm*mm | 410x410 |
Max. Mold Height | mm | 400 |
Min. Mold Height | mm | 145 |
Ejector Stoke | mm | 100 |
Ejector Force | KN | 42 |
Injection Unit | | |
Screw Diameter | mm | 36 42 46 |
Screw L/D Ratio | | 23.3 20 18.2 |
Injection Pressure | Mpa | 222 190.5 136 |
Shot Volume | cm3 | 183 249 298 |
Shot Weight(PS) | g | 172 234 281 |
Shot weight(PS) | QZ | 6.1 8.3 9.9 |
Injection Rate | g/sec | 69 95 113 |
Plasticizing capacity | g/sec | 14 21 28 |
Screw Stroke | mm | 180 |
Screw Speed | rpm | 164 |
Power Unit | | |
Hydraulic System Pressure | Mpa | 15 |
Pump Motor Power | KW | 11 |
Heater Power | KW | 7.8 |
General | | |
Dry-cycle time | sec | 1.5 |
Oil Tank Capacity | L | 210 |
Machine Weight | Ton | 3.8 |
Machine Dimensions(L*W*H) | m*m*m | 4x1.2x1.8 |