Powerjet 170 Ton Small Plastic Molding Injection Machine Equipment for Sale

• Customization: Available
• Clamping Force (Kn): 5600 Kn
• Screw L/D Ratio: 19
• Model NO.: BJ560-V6/S6
• Injection Weight (G): 3049 G
• Screw Diameter (mm): 100 mm
• Injection Rate (G/S): 592 G/S
• Open Stroke(mm): 860 mm
• Power (Kw): 38 Kw
• Mold Height(mm): 300 - 880 mm
• Ejector Stroke(mm): 240 mm
• Ejector Force(Kn): 135 Kn
• Trademark: Powerjet
• Origin: Guangdong, China
• Production Capacity: 4000 Set/Sets Per Month

Product Description

Products Description

CLAMPING UNIT

Center-pressing toggle structure design, high clamping force, high rigidity, low deformation, production fast and stable.T-slot platen, convenient and fast mould change.

S6 Servo motor

With the adoption of servo control system, the injection pressure & speed 15 under closed loop controlled, and the stability and repeatability can be achieved.

V6 Variable Pump

Perfect combination between computer and high efficient proportional plunger variable pump saves electricity by 25%-50%. The economic efficiency is high.

Comparing with the hydraulic machine, S6 series can save more 50% of the power. Comparing with full electrical machine, energy saving is more obviously seen during pressure hold & cooling stage.

Imported top grade hydraulic components

High precision oil filter and full flow bypass oil filter

Screw is driven by low speed & big torque hydraulic motor

Finite element analysis is used on the structure of

mould plates So that the structure of mould plate

is more logical,stronger and higher fatigue resistance.

Automatic dosing lubrication system guarantees mould clamping mechanism to be more stable and reliable.

 

High precision electric meter is used to control position. The control precision is +0.1mm.

Mechanical and double electric interlock protection devices guarantee the safety of the operators. (Machine above BJ400 is equipped with hydraulic safety device. )

 

Wear resistant hard chromium plated tie bar is featured

with high-tensile and high strength.

Hydraulic motor with centering gear mould adjusting system makes mould adjusting system to be better.

Powerjet BJ series

BJ Series Saving More Energy.

The Motor Will Stop At The Stage Of Cooling For Saving Energy And Also Can Provide Higher Injection Accuracy And Speed.
Clamping Force - 50~1380(Ton)
Driving System - Hydraulic
Motor Type - Servo Or Variable

Product Paramenters

DESCRIPTION			UNIT	BJ560-V6/S6
CLAMPING UNIT	Clamping force	KN	5600
		Opening stroke	mm	860
		Max.datlight	mm	1740
		Platen size	mm	1250*1250
		Space between bars	mm	860*860
		Max.mold height	mm	880
		Min.mold height	mm	300
		Ejector stroke	mm	240
		Ejector force	KN	135
INJECTION UNIT	Screw diameter	mm	100
		Screw L/D Ratio	L/D	19
		Injection Pressure	MPa	115
		Shot volume	cm3	3416
		Screw stroke	mm	435
POWER UNIT	Hydraulic system Pressure	MPa	17.5
		Pump motor power	KW	45/59.7
		Heater power	kW	38

Company Profile

POWERJET PLASTIC MACHINERY CO., LTD. is a high and new technology enterprise of R&D, manufacturing, sales, after-sales service of injection molding machine and blow molding machine. Powerjet was founded in 2000,occupying an area of 130,000 square meters. Annual production capacity has reach to 4000-5000 injection sets of. More than 20 offices have been set up in the global market, machines have been exported to more than 60 countries in the world. The machine specifications are complete, adapt to a variety of industries, cost-effective, and create high returns for customers. One-stop whole-process caring service.

Established distributors in multiple countries like Thailand, Malaysia, Indonesia, Vietnam, Uzbekistan, USA, Mexico, Brazil, and Pakistan, etc. With a global sales network, our local offices and agents can provide more convenient and sincere services.

Agent In Worldwide

Setting Up Agent In More Than 20 Countries For Sales And Support

Lifetime Support

24 Hours Online Service And Overseas Installation & Maintenance

Spare Parts

We Supplying Screw, Motor, Control Panel And Plastic Mold For Machines

Operation Training

Support Training To Engineer For Setup, Processing & Troubleshooting

Plastic Mold Testing

Provide Testing Mold Service Before Customer Receiving The Machine

Project Cases

 

FAQ

Q1: Are you a manufacturer or trading company?
A1: We are a factory for plastic machines. Over 24 Years Experience In Manufacturing Injection Molding Machine And Blow Molding Machine.

Q2: Delivery time
A2: Normally Machine Delivery from the factory in 0-60 days after receiving the down payment. (During Chinese Public Holidays like National Day or Chinese New Year, the delivery time should be 10-30 days longer accordingly).

Q3: Where is your factory located?
A3: Our factory is located in No.5 Chuangxin Xi Road, Leping Town, Sanshui District, Foshan City, Guangdong Province, China. 1h drive from Guangzhou to our factory. Welcome to visit our factory.